This new version V3 MCPX Brushless Converter 10A ESC is specially designed for E-Flite Blade mCPX V2 helicopter, it can work with both mCPX V1/V2 perfectly without any modification. The linear throttle is decent when using as-is but the signal wire can be direct soldered for 100% linear throttle.
The brushless converter is integrated with a 10A ESC, working current is 10A, the maximum current is NOT more than 11A for 20 seconds.
Recommended for using with C05M / M5 / HP05S brushless motors. When using with HP05S motor, direct solder to ESC is recommended. NOT recommended for using with more powerful motor than HP05S or with heavier battery than 300Mah as it may cause ESC to overwork and overheat.
Please note: This ESC/Converter is fully plug and play only when purchased with our HP05S or C05M motor we will include the compatible plug for the motor to make it plug and play.
1） Never connect the power in reverse polarity.
2） Prohibit changing output and input power wires.
Recommend installation position (only for MCPX helicopter):
Install the converter ESC between the main board and motor, let the ESC face the motor.
Programming functions: Not programmable.